This article shows you the steps to install Spacewalk 2.2 (aka Satellite) version on CentOS. To start with the install we need make sure that firewall and hostname and IP are configured correctly. Make sure that these ports are opened in the firewall.
Outbound open ports — 80, 443, 4545
Inbound open ports — 80, 443, 5222 and 5269, 69 udp if you want to use tftp (for kickstart PXE)
RAM requirements — 2GB Minimum , 4GB Recommended
This article will be based on CentOS 6. There is a one click script as well in BASH SCRIPTS section.
Make sure the hostname ,static IP and host entry is setup properly.
# vi /etc/sysconfig/network
NOTE: Anything before the first “.” is hostname and anything after that is the domain name.
You can get the hostname and domain with the following commands
# hostname -s
Would give you the short hostname
# hostname -d
Would give you the domain name
IP address should be static
# vi /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0 HWADDR=00:xx:xx:xx:xx:xx ONBOOT=yes BOOTPROTO=static IPADDR=192.168.1.2 NETMASK=255.255.255.0 GATEWAY=192.168.1.1
Add the hostname in /etc/hosts
# vi /etc/hosts
First we need to enable some Repos for Spacewalk.
Run this command
# rpm -Uvh http://yum.spacewalkproject.org/2.2/RHEL/6/x86_64/spacewalk-repo-2.2-1.el6.noarch.rpm
Now we need to enable a 3rd aprty Repository “Jpackage”.
Run this command
# cat > /etc/yum.repos.d/jpackage-generic.repo << EOF [jpackage-generic] name=JPackage generic #baseurl=http://mirrors.dotsrc.org/pub/jpackage/5.0/generic/free/ mirrorlist=http://www.jpackage.org/mirrorlist.php?dist=generic&type=free&release=5.0 enabled=1 gpgcheck=1 gpgkey=http://www.jpackage.org/jpackage.asc EOF
Need to enable another Repo for installing Spacewalk Packages
Run these command
# rpm -Uvh http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm # yum -y install spacewalk-setup-postgresql # yum -y install spacewalk-postgresql
Now you can go ahead with the Setup of Spacewalk
# spacewalk-setup --disconnected
# spacewalk-setup --disconnected * Setting up SELinux.. ** Database: Setting up database connection for PostgreSQL backend. ** Database: Installing the database: ** Database: This is a long process that is logged in: ** Database: /var/log/rhn/install_db.log *** Progress: # ** Database: Installation complete. ** Database: Populating database. *** Progress: ##################################### * Setting up users and groups. ** GPG: Initializing GPG and importing key. ** GPG: Creating /root/.gnupg directory You must enter an email address. Admin Email Address? [email protected]<br< a="">>* Performing initial configuration. * Activating Spacewalk. ** Loading Spacewalk Certificate. ** Verifying certificate locally. ** Activating Spacewalk. * Enabling Monitoring. * Configuring apache SSL virtual host. Should setup configure apache's default ssl server for you (saves original ssl.conf) [Y]? ** /etc/httpd/conf.d/ssl.conf has been backed up to ssl.conf-swsave * Configuring tomcat. * Configuring jabberd. * Creating SSL certificates. CA certificate password? Re-enter CA certificate password? Organization? Fedora Organization Unit [spacewalk.server.com]? Spacewalk Unit Email Address [[email protected]]? City? Brno State? CZ Country code (Examples: "US", "JP", "IN", or type "?" to see a list)? CZ ** SSL: Generating CA certificate. ** SSL: Deploying CA certificate. ** SSL: Generating server certificate. ** SSL: Storing SSL certificates. * Deploying configuration files. * Update configuration in database. * Setting up Cobbler.. Processing /etc/cobbler/modules.conf „/etc/cobbler/modules.conf“ -> „/etc/cobbler/modules.conf-swsave“ Processing /etc/cobbler/settings „/etc/cobbler/settings“ -> „/etc/cobbler/settings-swsave“ Cobbler requires tftp and xinetd services be turned on for PXE provisioning functionality. Enable these services [Y]? * Restarting services. Installation complete. Visit https://spacewalk-server.hm.local to create the Spacewalk administrator account.
When you login for 1st time it will ask you to create a Username and Password and then you are good to go.
After this you also need to register clients to Spacewalk for pushing any configs/updates.
If you encounter any errors during the process, let us know via Contact Us and will get it resolved promptly.