It’s possible to enable DNS forwarding using BIND and including reverse lookup for the zone. Once you are done with the config of a basic bind server, all you need to do is configure "/etc/bind/named.conf.options and conf.local" with the following options and restart the service.

In this example we have got 2 DNS server's resolving.

SERVER1 = raspi-qud.hm.local = domain : HM.LOCAL : IP: 172.16.64.1

SERVER 2 = viz-raspi-st.dev.local = domain : DEV.LOCAL :IP: 172.16.66.212

We need to resolve local requests for "hm.local" on SERVER 1 and forward any "dev.local" domain requests (forward and reverse lookups) to SERVER 2 and hence need to configure SERVER 1  to achieve this.

To start with add the zone dev.local to "/etc/bind/named.conf.local" and add the forward zone to the config file.

Add a comment

If you can't spend thousands for a static IP, Try out this script which sends out an email alert whenever Public IP address changes. In a situation where you need a VPN solution without spending thousands on a static IP no matter if you are a HOME user or a Small Business owner, all you need to have is a RasberryPi and a decent Small Business VPN Router. For this article I used a Cisco RV110w VPN Router.

Add a comment

Page 2 of 3

Most Read Articles

Add/Detect a new disk in ...

Written By Farooq Mohammed Ahmed on Sunday, 11 January 2015 19:22
Add/Detect a new disk in ...

Replace SSL Certificates ...

Written By Farooq Mohammed Ahmed on Friday, 16 December 2016 08:05
Replace SSL Certificates ...

Using awk in Alias Comman...

Written By Farooq Mohammed Ahmed on Friday, 19 February 2016 14:22
Using awk in Alias Comman...

Sed - Insert Text before ...

Written By Farooq Mohammed Ahmed on Monday, 20 November 2017 00:58
Sed - Insert Text before ...

Script to Monitor Nagios ...

Written By Farooq Mohammed Ahmed on Monday, 18 July 2016 22:48
Script to Monitor Nagios ...